Threading Die
Thread Rolling Flat Dies
In the arena of textile industries and manufacturing industries, a high degree of precision and accuracy is required to be maintained. The industrial machines used should be of high quality, precision and specifications. The major machines used are the thread rolling machines that are of different types according to their make and design.
In basic model of thread rolling machines there is a movable die that reciprocates back and forth relative to a stationary die in order to form threads on the shanks of fastener blanks which are fed successively between the dies. Such a machine forms threads on many different types and sizes of blanks. It is thus often changed over at frequent intervals to accommodate different blanks. It involves changing the dies and also the several set up adjustments in order to place the thread forming elements of the dies in proper longitudinal alignment. It is also required for the proper transverse spacing, squeeze angle and taper angle between the dies. Hence there was a need to invent a new and improved technology based machines. Presently, in the modern textile industry the adjustments in these machines are made automatic with fewer errors and the entire die set up adjustments is made to the stationary die. A unique mounting procedure and arrangement of the die carrying members is also available.
In this modern and hi tech era the flat thread rolling dies are made in pairs consisting of one moving die and another stationary die. These are made of D2 material, Mild Steel, High Tensile Steel and Stainless Steel. D2 tool steel is an air hardening, high-carbon, high-chromium tool steel with extremely high wear resisting properties. It is very deep hardening and free from size change after proper treatment. This high chromium content gives it mild corrosion resisting properties in the hardened condition. These dies are of two types viz duplex type and simplex type. The former is provided with threads on both sides. When one side is worn out, the other side can be used. While the latter one is provided with threads of fine pitch on single side only & can be used on fast moving machines.
Thread Rolling of all type of Automotive, Industrial, Structural and General purpose types follow this same technology. Dies of thread rolling machines of make SASPI, WATERBURY FARREL, NKW, NISSAI, Ingram tic etc are made as per the requirement and the given specification of the job work. Dies are also made for Bolt makers machines. Flat Dies are manufactured on the latest CNC machines maintaining the dimensional accuracies.
A wide range of thread rolling Flat dies, gimlet point dies, taper point and knurling dies.
are available for “AB”, “A” Type self tapping screws, such as wood screw, high-low screw, chipboard screw, drywall screw, and lag bolts etc. In every part of manufacturing and an in-house heat-treatment process, a high degree of quality is assured by stringent quality checks. The quality control mechanism enables one to meet the specification of ISO standard.
About the Author
With over 13 years of experience, skill, and knowledge, Arsh Tools Manufacturing Company has captured the market of Thread Rolling Dies, Thread Rolling Flat Dies and Fasteners manufacturers and exporters across India and abroad. For more information please visit http://www.radotools.com/.
|
|
6 LITTLE GIANT ROUND THREADING DIES W/ DIE HANDLE $0.99 |
|
|
TWO PRATT & WHITNEY PIPE THREADING DIES 1/2″ & 5/8″ N.C. $0.99 |
|
|
10-32 ” THREADING DIE 5/8″ OD VERMONT $1.95 |
|
|
M2.6 X 0.45 MM METRIC ROUND 1″ OD THREADING DIE NEW $1.95 |
|
|
GREENFIELD 10-32 THREADING DIE 13/16″ OD $2.95 |
|
|
3/16″ – 32 Threadit Hex Die High Speed Steel Made in USA Threading $3.22 |
|
|
Ace Threading Dies NOS $3.50 |
|
|
3/4 -24 Threading DIE Round Split Cutting USA 2-1/2″ $4.50 |
|
|
Hand Tap & Die for Threading – M4 x 0.7 $4.69 |
|
|
Hand Tap & Die for Threading – M10 x 1.5 $4.69 |
|
|
3/32″ – 48 Threading DIE Round Split Cutting USA 5/8″ $4.99 |
|
|
THREADING DIE 8-32 HEX RIGHT HAND $5.00 |
|
|
THREADING DIE 6-32 RD ADJUSTABLE SPLIT LEFT HAND $5.00 |
|
|
THREADING DIE 6-32 HEX RIGHT HAND $5.00 |
|
|
THREADING DIE 4-40 ROUND ADJ SPLIT RIGHT HAND $5.00 |
|
|
THREADING DIE 4-40 HEX RIGHT HAND MILFORD USA $5.00 |
|
|
THREADING DIE 4-36 ROUND ADJ SPLIT RIGHT HAND $5.00 |
|
|
THREADING DIE 3-56 ROUND ADJ SPLIT LEFT HAND $5.00 |
|
|
THREADING DIE 10-32 ROUND ADJ SPLIT RIGHT HAND $5.00 |
|
|
THREADING DIE 10-24 ROUND ADJ SPLIT RIGHT HAND $5.00 |
|
|
MACHINIST TOOL THREADING DIES 2 DIFFERENT SIZES, 3/16 AND 3/8 $5.00 |
|
|
THREADING DIE 8-32 ROUND 13/16″ OD ADJ SPLIT LEFT HAND CARBON STEEL NEW $5.00 |
|
|
THREADING DIE 5/16-18 ROUND 1″ OD ADJ SPLIT DIE LEFT HAND CARBON STEEL NEW $5.00 |
|
|
THREADING DIE 1/4-28 HEX RIGHT HAND $5.00 |
|
|
THREADING DIE 5/16-24 ROUND ADJ SPLIT RIGHT HAND $5.00 |
|
|
THREADING DIE 5/16-24 HEX RIGHT HAND $5.00 |
|
|
THREADING DIE 5/16-18 ROUND ADJ SPLIT RIGHT HAND $5.00 |
|
|
38mm OD 14mm Thick M14 Hand Tool Round Threading Die $5.73 |
|
|
GENUINE RIDGID 11565 Compression Spring 1224 Threading Machine & 815A Die Head $5.95 |
|
|
GENUINE RIDGID 44245 Thrust Washer for 1224 Threading Machine & 815A Die Head $5.95 |
|
|
Ridgid Tools ashtray pipe wrenches vises cutters threading dies vintage metal $5.99 |
|
|
ALFA DS63001 13/16″ ROUND DIE STOCK HANDLE F/ THREADING $5.99 |
|
|
THREADING DIE 8-36 ROUND ADJ SPLIT LEFT HAND $6.00 |
|
|
MACHINIST TOOL THREADING DIES 3 DIFFERENT SIZES, 1/4,3/8, AND 7/16 $6.00 |
|
|
MACHINIST TOOL THREADING DIES 3 DIFFERENT SIZES, $6.00 |
|
|
THREADING DIE 12-24 ROUND ADJ SPLIT RIGHT HAND $6.00 |
|
|
THREADING DIE 3/8-27 ROUND ADJ SPLIT RIGHT HAND $6.00 |
|
|
THREADING DIE 3/8-24 HEX RIGHT HAND $6.00 |
|
|
THREADING DIE 3/8-18ROUND ADJ SPLIT RIGHT HAND NOT PIPE $6.00 |
|
|
38mm OD 14mm Thick M14 Hand Tool Round Threading Die $6.18 |
|
|
38mm OD 14mm Thick M14 Hand Tool Round Threading Die $6.18 |
|
|
38mm OD 14mm Thick M14 Hand Tool Round Threading Die $6.20 |
|
|
THREADING DIE 1/2-20 HEX RIGHT HAND $6.50 |
|
|
7/16-14 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $6.99 |
|
|
BESLY 1/4″-28 UNF Hex Re-Threading Die EDP 70303 $7.28 |
|
|
K&S Threading Die,3-48 K+S418 $7.49 |
|
|
1/4-28 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $7.49 |
|
|
K&S Threading Die,2-56 K+S417 $7.49 |
|
|
K&S Threading Die,1-72 K+S416 $7.49 |
|
|
K&S Threading Die,4-40 K+S419 $7.49 |
|
|
Irwin Hanson 4mm 0.7 Hex Threading DIE Made in U.S.A $7.76 |
|
|
Irwin Hanson 5mm 0.8 Hex Threading DIE Made in U.S.A $7.76 |
|
|
TAPS AND THREADING DIES Machinery Data Sheets on CD $7.95 |
|
|
M5 X .80 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $7.99 |
|
|
M6 X 1.0 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $7.99 |
|
|
5/8 -18 N.F. HEX THREADING DIE (USED) $8.00 |
|
|
THREADING DIE 9-30 ROUND ADJ SPLIT RIGHT HAND $8.00 |
|
|
THREADING DIE 12-28 ROUND ADJ SPLIT LEFT HAND $8.00 |
|
|
THREADING DIE 12-24 ROUND ADJ SPLIT LEFT HAND $8.00 |
|
|
Hanson 12008 Die Threading Tool – Plain Stock Ds-9 For 1in Hex/round $8.10 |
|
|
7/16-20 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $8.99 |
|
|
M7 X 1.0 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $8.99 |
|
|
J&L chasers dies die head threading tapping 13/16″-10 $8.99 |
|
|
K&S Engineering Threading Die,4-40, $8.99 |
|
|
K&S Engineering Threading Die,1-72, $8.99 |
|
|
K&S Engineering Threading Die,0-80, $8.99 |
|
|
K&S Engineering Threading Die,2-56, $8.99 |
|
|
THREADING DIE 16-32 ROUND ADJ SPLIT RIGHT HAND $9.00 |
|
|
THREADING DIE 16-18 ROUND ADJ SPLIT RIGHT HAND $9.00 |
|
|
THREADING DIE 3/16-32 HEX DIE RIGHT HAND $9.00 |
|
|
THREADING DIE 1/8-32 ROUND ADJ SPLIT RIGHT HAND $9.00 |
|
|
Irwin Hanson 7252 High Carbon Steel Re-Threading Fractional Hexagon Die $9.00 |
|
|
Vintage Threading Dies Round&Square $9.00 |
|
|
hobby/model/craft 1-72 Die Re-threading tool K&S#416 $9.25 |
|
|
USED SNAP-ON USA 3/8″-24 NF THREADING DIE .375″-24 $9.39 |
|
|
THREADING DIE 9/16-12 ROUND ADJ SPLIT LEFT HAND $9.50 |
|
|
6 Various Dies and 1 Die adapter 2 ½” to 1 ½” Metal Threading $9.95 |
|
|
Collins Threading Die Set 1-1/4″ NC, #1 to #4 $9.99 |
|
|
Collins Threading Die Set 1/8″ NPT #1 to #4 $9.99 |
|
|
9/16-12 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $9.99 |
|
|
9/16-18 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $9.99 |
|
|
1/4-20 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $9.99 |
|
|
5/16-18 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $9.99 |
|
|
Collins Threading Die Set 1-3/4″ NC, #1 to #4 $9.99 |
|
|
1 SET 5/8-18 RH INSERT CHASERS CLEVELAND TWIST DRILL, THREADING DIE SET $9.99 |
|
|
Toledo 00 Small Threading Die Ratchet w/ 1/4″ Die for Threading Pipe $9.99 |
|
|
5/16-24 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $9.99 |
|
|
Ridgid Bolt Threading Die 9/16-12 NC Thread, for OO Threader, good used $9.99 |
|
|
PIPE THREADER WRENCH WITH 9 PIPE THREADING DIES ONE 12″ PIPE TAP $9.99 |
|
|
TWO REGAL BRAND SPLIT PIPE THREADING DIES IN HOLDER 1 1/4 & 1 1/2 – 12NF-2A $9.99 |
|
|
New In Package Ridgid 37830 3/4″ NPT 14TPI-RH 12-R Pipe Threading Dies $9.99 |
|
|
Ridgid #37825 pipe threading dies 1/2″ npt $9.99 |
|
|
DIE 1/8-27 NPT X 1″ OD HEX THREADING DIE $9.99 |
|
|
TRIAD PIPE THREADING DIE HOLDER $9.99 |
|
|
J&L chasers dies die head threading tapping JL 1″-14 $9.99 |
|
|
1913 ad Armstrong Stock Dies Pipe Threading Machines $9.99 |
|
|
2-1/32″ -24 dies GEOMETRIC Thread chasers Threading $9.99 |
|
|
Old Pipe Dies for threading pipe ??? ( Antique)???? $10.00 |
|
|
JAPAN THREADING DIE-3/8″X24NF 1 1/2″OD SPLIT HSS GOOD C $10.00 |
|
|
M12 X 1.75 LEFT HAND CARBON STEEL HEXAGONAL RE-THREADING DIE $10.29 |
