Chicago Pneumatic
April 3rd, 2004
which dryer is most suitable for compressed air, refrigerent or heatless air dryer ?
i have chicago pneumatic air compressor with a capacity of 200 cfm at 10 kg/cm2 and is used for micronising material in pharma area . presently i have trident make refrigerent air dryer but facing moisture problem , is heatless air dryer is better than refrigerent air dryer?and what is the advantage and disadvanges of both air dryer ?
*A Heatless compressed air dryer ( drier ) is the simplest form of dessicant type gas or air dryer ( drier ) for achieving a dew point of -40°C or better for compressed air systems and other gas and air dryer ( drier ) applications .
We are using such drier for a long.
One advantage of heatless dryers is that they can be pneumatically controlled, this allows them to be installed into hazardous areas.
Dew point is making the difference and -40 deg C or lower, moisture content is almost eliminated.
Thats why it is used in instrument air compressor.
Heatless type drier takes advantage of the natural phenomenon of desiccant to establish equilibrium with their surroundings. In this type, wet air (fluid) is cycled automatically between two desiccant towers, one adsorbing the moisture from the wet fluid, white the other being regenerated. The wet fluid enters one tower, passes through the desiccant bed where the saturated moisture is adsorbed. A small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At preset interval, the towers changeover automatically and the cycle continues giving out a regular supply of super dry air having dew point up to (-) 70deg C (atm. )
|
|
CHICAGO PNEUMATIC 3/8″ IMPACT WRENCH – #RP9525 $0.99 |
|
|
Chicago Pneumatic CP789R-26 3/8″ Cordless Reversible Drill USED $0.99 |
|
|
1970 Instruction and Parts booklet for Chicago Pneumatic CP-456 Chipper $2.99 |
|
|
Tip Washers For Chicago Pneumatic Tools Air Hammer $3.00 |
|
|
Chicago Pneumatic Quick-Change Retainer A-46095A $3.49 |
|
|
CP SPLINE DRIVE IMPACT HEAVY DUTY TOUGH SOCKET 1-1/2 $3.50 |
|
|
New Chicago Pneumatic Gasket for CP Models/ Part # CA148528 $3.75 |
|
|
Chicago Pneumatic CA094791 $4.10 |
|
|
Chicago Pneumatic 8940158407 $4.26 |
|
|
CHICAGO PNEUMATIC PNEUMATIC NUTRUNNER,3/8″ DRIVE $4.28 |
|
|
CP Dual Fuel Engine for Sanitation Plant by Chicago Pneumatic 1966 Print Ad $4.40 |
|
|
CHICAGO PNEUMATIC AIR IMPACT HEAVY DUTY SOCKETS 1-1/8 $4.50 |
|
|
CP CHICAGO PNEUMATIC AIR IMPACT HEAVY DUTY Spline Drive SOCKET 1″ $4.50 |
|
|
O-Ring-Chicago Pneumatic Air Scribe- Rubber-O-Ring – Engraving-Tools 6 PCs $4.95 |
|
|
Chicago Pneumatic CP 7″ Angle Chisel 1/2″ Shank 1 3/8″ Wide NEW $4.99 |
|
|
2 x CP Chicago Pneumatic Racing Decal Stickers 3 Inch Long Size New $4.99 |
|
|
2005 Erica Enders Chicago Pneumatic Chevy Cobalt Pro Stock NHRA postcard $4.99 |
|
|
Vintage Chicago Pneumatic no. 7224 3/4″ Wrench Forged Alloy Steel $5.00 |
|
|
Chicago Pneumatic Chisel Air Scribe Tips $5.00 |
|
|
New Chicago Pneumatic Air Tool Oil 4 oz./Part # CA149661 $5.00 |
|
|
Chicago Pneumatic KF125190 $5.03 |
|
|
Chicago Pneumatic Soc 19Mm 1/2D Imp Wheel Nt 6Pt Tw 8940164135 $5.13 |
|
|
CHICAGO PNEUMATIC AIR IMPACT HEAVY DUTY SOCKETS 1-5/16″ $5.50 |
|
|
2 CHICAGO PNEUMATIC CP-3081 RUNADAC PNEUMATIC NUTRUNNER,3/8″ DRIVES $5.53 |
|
|
Vintage 1950 Chicago Pneumatic Rivet Pull Gun Instruction & Parts CP-352-RP $5.99 |
|
|
Old FRANKLIN Pa Pennsylvania Postcard CHICAGO PNEUMATIC TOOL Co Venango County $6.00 |
|
|
Chicago Pneumatic C063754 $6.29 |
|
|
Vintage CP Chicago Pneumatic 7461 Alloy 5″ Extension 1/2″ Drive Made in Japan $6.99 |
|
|
3/4″ Chicago fitting pneumatic Air Hose Fitting, Galvanized NOS $6.99 |
|
|
1″ Combination Wrench $7.00 |
|
|
1922 Chicago Pneumatic Tool Co Ad: Riter-Conley Leetsdale PA Barge Erecting Yard $7.00 |
|
|
1939 Chicago Pneumatic Tool Co Ad: CP Stationary Compressor Delaware Aquaduct $7.00 |
|
|
1920 PRESTIGE CHICAGO PNEUMATIC AIR COMPRESSOR PRINT AD $7.11 |
|
|
NEW Chicago Pneumatic Silencer CPTE 6153962560 $7.95 |
|
|
MgDRIVEN TECHNOLOGY – CHICAGO PNEUMATIC – ADJUSTABLE BALL CAP HAT! $7.99 |
|
|
Filter replaces Chicago Pneumatic PN 2236-1060-18 $8.00 |
|
|
1 1/16 Combination Wrench $9.00 |
|
|
NEW Chicago Pneumatic KF124397 pawl ratchet $9.95 |
|
|
Lot of 3 Chicago Pneumatic Part# CA127055 Air Tool ? $9.95 |
|
|
1902 Paper Ad Puncture Proof Self Healing Pneumatic Bicycle Tire Vim Co Chicago $9.95 |
|
|
Chicago Pneumatic Air Drill $9.99 |
|
|
CHICAGO PNEUMATIC IMPACT WRENCH 1 1/2″ MODEL 6120 $9.99 |
|
|
Vintage Chicago Pneumatic 1/2″ Square Drive Auto-Wrench No. 730RS For Parts $9.99 |
|
|
chicago pneumatic oil drill division belt buckle solid brass by award design $9.99 |
|
|
Chicago Pneumatic Tool CP Portable Air Compressors 1952 print Ad advertisement $9.99 |
|
|
Chicago Pneumatic Diesels Type 8 9 Engines 1956 $9.99 |
|
|
Vintage 1962 Chicago Pneumatic Aero Riveters Instruction Parts CP- 2X 3X 4X $9.99 |
|
|
Chicago Pneumatic Two-Stage Air-Cooled Compressors Catalog $9.99 |
|
|
Chicago Pneumatic Class PB-20 Air-Cooled Compressors and Vacuum Pumps Catalog $9.99 |
|
|
Chicago Pneumatic Aftercoolers Piple Line Multiple Shell Sales Brochure Catalog $9.99 |
|
|
Chicago Pneumatic 3-Stage Horizontal Straight Line Compressors Sales Brochure $9.99 |
|
|
Chicago Pneumatic Engines 112 114 CP and CPS Sales Brochure Catalog $9.99 |
|
|
Chicago Pneumatic Mine Mining Roof Bolting Unit Drills Supports 1950 print Ad $9.99 |
|
|
CHICAGO PNEUMATIC S813SQ 1″ IMPACT SOCKET $9.99 |
|
|
5 Vintage Chicago Pneumatic Match Books By Lion Match Corp. Chicago $9.99 |
|
|
New Chicago Pneumatic Valve-Throttle/Part # KF125190 $10.00 |
|
|
1 1/4 Combination Wrench $10.00 |
|
|
NEW 2 PACK OF CHICAGO PNEUMATIC # C112189 SPRING $10.00 |
|
|
Chicago Pneumatic Springfield IL Sewage Plant 1967 Ad $10.00 |
|
|
Chicago Pneumatic Tool Air Impact Wrench 1950 print Ad $10.00 |
|
|
Jenkins Valves Chicago Pneumatic Tool Utica ny Plant Ad $10.00 |
|
|
New Chicago Pneumatic O-Ring for Chicago Pneumatic Models/ Part # A082777 $10.00 |
|
|
New Chicago Pneumatic Stem-Valve for CP Models/ Part # KF124391 $10.00 |
|
|
New Chicago Pneumatic Spring-Throttle for CP Models/ Part # CA142464 $10.25 |
|
|
Vintage Chicago Pneumatic “Eye Popping Performance” Pocket Protector unused $11.95 |
|
|
4 Chicago Pneumatic Cap-Housing Replacement KF124526 $12.00 |
|
|
NEW CHICAGO PNEUMATIC # C112190 SEAT-SPRING $12.00 |
|
|
Filter replaces Chicago Pneumatic PN 4PS915 $12.00 |
|
|
Filter replaces Chicago Pneumatic PN 51PS3072 $12.00 |
|
|
Filter replaces Chicago Pneumatic PN 5PS878 $12.00 |
|
|
Chicago Pneumatic CA 127051 Model 958 Impact Wrench Plate $12.75 |
|
|
Chicago Pneumatic 3/4″ Shank Chipping Chisel 12″, NEW $12.79 |
|
|
Chicago Pneumatic Boot for 749 #CA155537 $12.99 |
|
|
New Chicago Pneumatic Valve-Throttle/Part # 145972 $13.00 |
|
|
Filter replaces Chicago Pneumatic PN 2236-1083-45 $13.00 |
|
|
Filter replaces Chicago Pneumatic PN 2236-1083-52 $13.00 |
|
|
Filter replaces Chicago Pneumatic PN 2236-1085-47 $13.00 |
|
|
Disc Brake Caliper Piston Rewind Wind Back Tool Kit Car Truck ( Air Operated ) $13.50 |
|
|
VINTAGE TWITCHELL PNEUMATIC TIRE PREASURE GAUGE TWITCHELL GAUGE CO CHICAGO, ILL. $13.99 |
|
|
Filter replaces Chicago Pneumatic PN 2236-1085-58 $14.00 |
|
|
New Chicago Pneumatic Trigger/Throttle for CP Models/ Part # CA147017 $14.00 |
|
|
Chicago IL – CHICAGO PNEUMATIC FACTORY DOOR – RPPC Postcard $14.50 |
|
|
Chicago Pneumatic Name Plate from a Tugger or Balancer $14.99 |
|
|
CHICAGO PNEUMATIC K255884 SPINDLE BOARD $14.99 |
|
|
CHICAGO PNEUMATIC AIR SANDER $14.99 |
|
|
CHICAGO PNEUMATIC S417MD 17MM 6-POINT 1/2″ DRIVE NEW $14.99 |
|
|
CHICAGO PNEUMATIC AIR WRENCH $14.99 |
|
|
AC Delco PT405 Alternator Replacement Connector Pigtail $14.99 |
|
|
Vintage Chicago Pneumatic Air Chisel $15.00 |
|
|
Chicago Pneumatic Cp-782 Air Drill $15.00 |
|
|
Chicago Pneumatic 1/2 in Impact Housing Parts $15.00 |
|
|
CHICAGO PNEUMATIC 3/8 INCH BUTTERFLY RATCHET AIR WRENCH TOOLS $15.00 |
|
|
Chicago Cylinder PNEUMATIC PISTON P-9-2-S $15.00 |
|
|
Chicago Pneumatic 3083412110, 12″ Narrow Chisel – 3/4″ Tip $15.00 |
|
|
Chicago-Pneumatic CA145357 Tune-up Kit for Model CP775 $15.00 |
|
|
Chicago Pneumatic 3/4″ Narrow Chisel – 3083 4121 10 $15.00 |
|
|
New Chicago Pneumatic Valve-Throttle for CP Models/ Part # CA142460 $15.25 |
|
|
CHICAGO PNEUMATIC K255884 SPINDLE BOARD $15.49 |
|
|
Chicago Pneumatic Cylinder D-12-1 $15.95 |
|
|
Chicago Pneumatic CONSTRUCTION 3083410000 9 Moil Point .680 FREE SHIPPING $16.75 |
|
|
Interstate Pneumatics WR1020 1/4 Inch Standard Poly Bowl In-Line Filter $4.99 General purpose filter protects tools and equipment by removing most solid and liquid contaminants. This may include dust, dirt, pipe scale, rust, liquid water and bulk oil. A 25-micron filter element removes the smallest of particles. See-through bowl with metal guard allows easy monitoring of fluid level while protecting unit against impact. Quick-release bowl and quarter-turn drain for easier u… |
|
|
40503 0-RING 7.65X1.78… |
|
|
Chicago Pneumatic CP875 1/4-Inch 90 Degree Angled Air Die Grinder $52.00 This Chicago Pneumatic mini angle die grinder boasts a compact, lightweight design for easy maneuverability and a 90deg angle head for flexibility in confined areas. Air Inlet Size (in. NPT): 1/4, Air Consumption (CFM): 5.5, CFM at Load: 22, Speed (RPM): 22,500, Min. Hose Size (in.): 3/8, Collet Size (in.): 1/4, Variable Speed: Yes, Side Handle: No, Tool Weight (lbs.): 1, Tool Length (in.): 4 7/8… |
|
|
Paslode 901000 18 Gauge Finish Nailer $239.40 18-Gauge Cordless Brad Nailer… |
|
|
Ingersoll Rand 3108K Composite Pneumatic Die Grinder Kit with Carbide Burrs $92.15 For the ultimate performance and versatility in a lightweight package with superior maneuverability, the 3108 is the perfect choice. With all ball bearing constructions, you get longer lasting life and advanced durability, along with a composite grip for superior ergonomics and comfort. Use this powerful die grinder in a various applications including porting, weld braking, debarring, polishing an… |
|
|
RATCHET AIR 3/8 W/ CASE, 5 SOC, LIGH $111.98 Features and Benefits: Features CP’s new anti-slip head design which virtually eliminates slippage while reducing the potential for heat build-up, even in long run downs Compact, yet packed with power and speed Efficient 112 hp motor provides up to 50 ft./lb. of torque Advanced head design provides dramatically longer life Includes 5 sockets, flashlight and blow molded caseTeasing… |
|
|
New-BATTERY FOR CPT8740/30 14.4 VOLT – CPT8940158630 Replacement or backup rechargeable 14.4 volt battery…. |
|
|
Shure Beta 58A Supercardioid Dynamic Microphone $135.99 The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide. The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. … |
|
|
Shure DMK57-52 Drum Microphone Kit $379.00 Here’s a fantastic, pre-packaged selection of world-famous professional microphones and mounting hardware ideally suited for recording and performing drummers. This package includes three SM57s, one Beta 52(R), three of Shure’s superb, new A56D drum mounting systems, and a lightweight and durable carrying case. High profiles drummers like Simon Phillips, Dennis Chambers and Dave Weckl, among the m… |
|
|
Carbide-Tipped Stylus Points – stylus $30.70 147-P054177 Features: -For writing and marking.-Quantity: 1.-Type: Chisel Bit.-Price is for 1 Each…. |
